Grass Valley Ignite SDC - Manual (Page 97)

Ignite SDC/HDC Robotic Camera Instruction Manual 97
Menu Selections
Gen-Lock Menu
The GEN-LOCK menu is shown in Figure 68 . Menu selections are
described in Table 48 .
Figure 68. GEN-LOCK Menu
Table 48. GEN-LOCK Menu Selections
Selection Description
GEN-LOCK INPUT [BNC, DSUB]
For selecting whether the sync signals are to be input from the BNC or D-
SUB connector.
H PHASE-COARSE
[–40 to +40 (720 mode)]
[–60 to +60 (1080 mode)] For roughly adjusting the horizontal phase.
H PHASE-FINE [–45 to +45] For finely adjusting the horizontal phase.
SD HD PHASE CRS [–4 to +4]
For roughly adjusting the phase of the HD video signals when SD sync
signals have been input.
SD HD PHASE FINE [–99 to +99]
For finely adjusting the phase of the HD video signals when SD sync sig-
nals have been input.
SD HD PHASE CRS :+0
SD HD PHASE FINE :+00
GEN-LOCK
GEN-LOCK INPUT
:BNC
H PHASE-COARSE :+00
H PHASE-FINE :+000
** **
8492_62_r0