Other settings overview – Grass Valley Ignite SDC User Manual
Page 48

48
Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix A — SD (NTSC) Camera Block
Other Settings Overview
Figure 23. Other Settings Submenu
Clean DNR
(OFF, Low, High) This enables the clean DNR effect to be selected.
Flesh Noise Sup.
(OFF, Low, High) Flesh noise is suppressed in two steps when the Level
setting is at High or Low.
Table 8. Other Settings
Selection
Description
Contrast (Gamma)
(Low, Mid, High) Contrast can be adjusted to any of three levels.
Shutter Speed
OFF: Electronic shutter is turned off.
1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
Electronic shutter operates at one of these speeds as selected.
S/Scan (Synchro Scan): Electronic shutter operates at the speed set with
the Synchro Scan setting.
Auto ND: Electronic shutter is controlled to automatically adjust the lumi-
nance.
*Flickering may increase at Auto ND under fluorescent lights. *Auto ND is
automatically selected if Auto ND (ELC) setting is set to ON.
Table 7. Sharpness (DTL) Settings
Selection
Description
8492_19_r0