beautypg.com

Color matrix settings – Grass Valley Ignite SDC User Manual

Page 73

background image

Ignite SDC/HDC Robotic Camera Instruction Manual

73

Menu Selections

Color Matrix Settings

Figure 45. Color Matrix Setting Submenu

Detail Band

(1 to 5) A contour correction band can be set with the Detail setting at High
or Low. The higher setting, the finer will be the detail.

Noise Suppress

(1 to 10) Screen noise can be reduced with the Detail setting at High or
Low. If the noise suppress compensation level is set too high, a fine object
will be reproduced less sharply.

Level Dependent

(0% to 25%) Screen noise due to the detail of dark parts of an object can
be reduced. If the Level Dependent setting is set too high, however, hair, for
example, will be reproduced less sharply.

Dark Detail

(0 to 5) The contours of the darker portions of an object can be empha-
sized. This setting is possible only when the Level Dependent setting is set
to 0%.

Chroma Detail

(0 to 15) The contours of high-hue portions of an object can be empha-
sized.

Flesh Noise Sup.

(Off, Low, High) Flesh noise is suppressed in two steps when the Detail
setting is at High or Low.

Precision Detail

(Off, Low, High) This setting is to narrow detail width and suppress detail
glare.

Table 28. Color matrix Settings

Selection

Description

B_Mg Gain

Increases or decreases the hue of the intermediate color between blue and
magenta.

B_Mg Phase

Varies the hue of the intermediate color between blue and magenta.

Mg Gain

Increases or decreases the magenta.

Mg Phase

Varies the hue of the magenta.

Mg_R Gain

Increases or decreases the intermediate color between magenta and red.

Mg_R Phase

Varies the hue of the intermediate color between magenta and red.

R Gain

Increases or decreases the red.

R Phase

Varies the hue of the red.

R_YI Gain

Increases or decreases the intermediate color between red and yellow.

R_YI Phase

Varies the hue of the intermediate color between red and yellow

YI Gain

Increases or decreases the intermediate color of yellow.

YI Phase

Varies the hue of the yellow.

YI_G Gain

Increases or decreases the intermediate color between yellow and green.

Table 27. Detail Settings

Selection

Description

8492_37_r0

This manual is related to the following products: