Grass Valley Ignite SDC - Manual (Page 88)

88 Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix C — HD Camera Block
Skin Tone Detail Menu
The SKIN TONE DETAIL menu is shown in Figure 59 . Menu selections are
described in Table 40 .
Figure 59. SKIN TONE DETAIL Menu
Table 40. SKIN TONE DETAIL Menu Selections
Selection Description
SKIN TONE DTL [OFF, ON] For turning the SKIN TONE DTL ON or OFF.
SKIN GET [OFF, ON]
When ON is selected, the box cursor is output to the screen center. When
the image of the subject’s skin is placed inside the box cursor and the
ENTER operation is performed, I CENTER and Q PHASE are set automati-
cally.
SKIN DTL CORING [0 to 7] For setting the SKIN TONE DTL coring amount.
Y MAX [0 to 255]
For setting the upper limit of the brightness in the skin tone specification
area.
Y MIN [0 to 255]
For setting the lower limit of the brightness in the skin tone specification
area.
I CENTER [0 to 255] For setting the phase of the I axis in the skin tone specification area.
I WIDTH [0 to 255] For setting the phase width of the I axis in the skin tone specification area.
Q WIDTH [0 to 255] For setting the phase range of the Q axis in the skin tone specification area.
Q PHASE [–128 to +127] For setting the phase of the Q axis in the skin tone specification area.
SKIN TONE DETAIL
SKIN TONE DTL
:OFF
SKIN GET :OFF
SKIN DTL CORING :5
Y MAX :190
Y MIN :010
I CENTER :055
I WIDTH :090
Q WIDTH :010
Q PHASE :+000
** **
8492_51_r0