Grass Valley Ignite SDC - Manual (Page 54)

54 Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix A — SD (NTSC) Camera Block
Color Matrix Settings
Figure 28. Color Matrix Setting Submenu
H Detail Level L (0 to H-1)
V Detail Level L (0 to H-1)
Detail Band
(1 to 5) A contour correction band can be set with the Detail setting at High
or Low. The higher setting, the finer will be the detail.
Noise Suppress
(1 to 10) Screen noise can be reduced with the Detail setting at High or
Low. If the noise suppress compensation level is set too high, a fine object
will be reproduced less sharply.
Level Dependent
(0% to 25%) Screen noise due to the detail of dark parts of an object can
be reduced. If the Level Dependent setting is set too high, however, hair, for
example, will be reproduced less sharply.
Dark Detail
(0 to 5) The contours of the darker portions of an object can be empha-
sized. This setting is possible only when the Level Dependent setting is set
to 0%.
Chroma Detail
(0 to 15) The contours of high-hue portions of an object can be empha-
sized.
Flesh Noise Sup.
(OFF, Low, High) Flesh noise is suppressed in two steps when the Detail
setting is at High or Low.
Precision Detail
(OFF, Low, High) This setting is to narrow detail width and suppress detail
glare.
Table 13. Color matrix Settings
Selection Description
B_Mg Gain
Increases or decreases the hue of the intermediate color between blue and
magenta.
B_Mg Phase Varies the hue of the intermediate color between blue and magenta.
Mg Gain Increases or decreases the magenta.
Mg Phase Varies the hue of the magenta.
Mg_R Gain Increases or decreases the intermediate color between magenta and red.
Mg_R Phase Varies the hue of the intermediate color between magenta and red.
R Gain Increases or decreases the red.
R Phase Varies the hue of the red.
R_YI Gain Increases or decreases the intermediate color between red and yellow.
R_YI Phase Varies the hue of the intermediate color between red and yellow
YI Gain Increases or decreases the intermediate color of yellow.
Table 12. Detail Settings
Selection Description
8492_22_r0