Grass Valley Ignite SDC - Manual (Page 107)

Ignite SDC/HDC Robotic Camera Instruction Manual 107
Appendix
D
Robotic (Pan/Tilt Head)
Controls and Indicators
Robotic pan/tilt head controls and indicators are shown in Figure 74 and
described in Table 55 .
Figure 74. Robotic Pan/Tilt Head Controls and Indicators
Table 55. Robotic Pan/Tilt Head Controls and Indicators
Item Name Description
1
Zero degree tilt
registration hole
Used to orient the pan/tilt head in the desired direction prior to mounting.
2 Robotic pan/tilt head
Contains the electro-mechanical assemblies necessary to perform pan/tilt
movement.
3 Reset switch
Resets the pan/tilt head to default IP addresses 192.168.0.126 and subnet
mask to 255.255.255.0. Also sets controller (SHOT Director) address to
192.168.0.100.
4 Ethernet connector IP control/communication from subnet hub
5
Amphenol circular
connector
48 V dc power supply input
FRONT REAR 8492_69_r0
1 2 3
4 5 6 7
8 9
10