Grass Valley Ignite SDC - Manual (Page 100)

100 Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix C — HD Camera Block
Camera ID Menu
The CAMERA ID menu is shown in Figure 71 . Menu selections are
described in Table 51 .
Figure 71. CAMERA ID Menu
Table 51. CAMERA ID Menu Selections
Selection Description
ID:
An ID of not more than 10 characters consisting of alphanumerics, sym-
bols and spaces can be set for the camera. The camera ID is displayed at
all times when ON is selected in the CAM ID mode but displayed only
when color bar signals are output in the BAR mode. The status for setting
the ID is established by moving the cursor above the colon (:) and select-
ing it. Move the cursor to the positions of the characters to be set, select
the characters and enter them. Characters which can be entered: spaces,
upper-case letters (A to Z), numbers (0 to 9), and symbols (' , >, <, /, -)
CAMERA ID
ID :CAM1
* *
8492_65_r0