Grass Valley Ignite SDC - Manual (Page 67)

Ignite SDC/HDC Robotic Camera Instruction Manual 67
Menu Selections
Sharpness (DTL) Setting Overview
Figure 39. Sharpness (DTL) Settings Submenu
Table 22. Sharpness (DTL) Settings
Selection Description
DTL Select
(Normal, Super DTL) If contour correction is not sufficient at the Normal
position when Detail Level setting is set to Low or High, select the Super
DTL position.
*Neither Normal nor Super DTL is valid for contour correction if Detail
Level setting is in the OFF position.
Level
(Off, Low, High) Detail level can be adjusted when Detail Select setting is at
Normal. Super DTL level can be adjusted when it is at Super DTL.
Noise Suppress
(Off, Low, High) Screen noise can be reduced when Detail Level setting is
at High or Low.
Clean DNR (Off, Low, High) This enables the clean DNR effect to be selected.
Flesh Noise Sup.
(Off, Low, High) Flesh noise is suppressed in two steps when the Level set-
ting is at High or Low.
8492_31_r0