Grass Valley Ignite SDC - Manual (Page 41)

Ignite SDC/HDC Robotic Camera Instruction Manual 41
Appendix
A
SD (NTSC) Camera Block
Controls and Indicators
SD (NTSC) camera controls and indicators are shown in Figure 16 and
described in Table 3 .
Figure 16. SD Camera Controls and Indicators
Table 3. SD Camera Controls and Indicators
Item Name Description
1 Lens mount 2/3” Standard bayonet type (B4) mount.
2 Lens fixing ring knob
Rotate the lens fixing ring knob counterclockwise and remove the lens mount
cap. Mount the lens on the camera and rotate the lens fixing ring knob clock-
wise in order to fix the lens securely.
3 Zoom/Focus connector Not Used.
4
Video Output connector
(VIDEO OUT) Composite video output.
5
G/L Input connector
(G/L IN) Gen-lock input.
6
I/F Remote connector
(I/F REMOTE) Input terminal dedicated to control signals from an optional remote control
box.
7 Iris connector (IRIS) Input terminal for lens with an iris control function.
8
DC 12 V input connector
(DC 12V IN) 12 V dc input.
9 Power indicator Red LED lamp lights when DC power is supplied to the camera.
3 4
5
6
7
8 9
10
11
12
13
1
2
FRONT REAR
8492_12_r0
ZOOM/FOCUS
SDI
OUT
1
SDI
OUT
2
14