Grass Valley Ignite SDC - Manual (Page 94)

94 Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix C — HD Camera Block
Mode Menu
The MODE menu is shown in Figure 66 . Menu selections are described in
Table 46 .
Figure 66. MODE Menu
Table 46. MODE Menu Selections
Selection Description
D5600K [OFF, ON]:
When the VIDEO MENU is
selected.
LIGHTING [TUNGSTEN,
DAYLIGHT]:
When the FILM MENU is
selected For electrically compensating for a color temperature of approximately
5,600K.
GAIN SELECT
[LOW, MID, HIGH, S.GAIN1 to 3]
For selecting LOW, MID, HIGH, S.GAIN1, S.GAIN2 or S.GAIN3 as the gain
setting.
CAM ID [OFF, BAR, ON]
For selecting how the camera ID is to be displayed.
OFF: The camera ID is not displayed.
BAR: The camera ID is displayed only in the color bar mode.
ON: The camera ID is displayed at all times.
CAM ID POSI [0 to 3]
For selecting where the camera ID is to be displayed.
0: top left,
1: top right,
2: bottom left,
3: bottom right
MATRIX TABLE [OFF, A, B] For selecting OFF, A or B as the matrix setting.
COLOR CORRECTION [OFF, ON] For turning the color correction function ON or OFF.
DIGITAL EXTENDER [OFF, ON] For digitally doubling the images when set to ON.
BAR SEL
[FULL (16:9), FULL (4:3),
SMPTE (16:9), SMPTE (4:3),
ARIB] For selecting the color bars. Select the 4:3 color bars for down-conversion
at the system side. The color bars and characters will then be contained
within the 4:3 picture angle.
MODE (1/2)
D5600K
:OFF
GAIN SELECT :LOW
CAM ID :BAR
CAM ID POSI :1
MATRIX TABLE :OFF
COLOR CORRECTION :OFF
DIGITAL EXTENDER :OFF
BAR SEL :FULL (16:9)
FORMAT :1080/59.94i
MODE (2/2)
STATUS
:OFF
MENU ON BAR :OFF
MENU SEL :VIDEO MENU
FAN :AUTO
** ** ** **
8492_58_r0
CAM1 CAM1
CAM1
0 1
2 3
CAM1
8492_59_r0