Grass Valley Ignite SDC - Manual (Page 102)

102 Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix C — HD Camera Block
Time Code Menu
The TIME CODE menu is shown in Figure 73 . Menu selections are
described in Table 53 .
Note TIME CODE is displayed ONLY when FILM MENU has been set and either the
720/60p or 720/59.94p format has been selected.
Figure 73. TIME CODE Menu
Table 53. TIME CODE Menu Selections
Selection Description
RESET For resetting the time code to zero.
HOUR [00 to 23] For setting the hour digits of the preset value for the time code.
MINUTE [00 to 59] For setting the minute digits of the preset value for the time code.
SECOND [00 to 59] For setting the second digits of the preset value for the time code.
FRAME [00, 10, 20, 30, 40, 50] For setting the frame digits of the preset value for the time code.
PRESET For presetting the time code.
RESET
TIME CODE
HOUR :00
MINUTE :00
SECOND :00
FRAME :00
PRESET
* *
8492_67_r0