Grass Valley Ignite SDC - Manual (Page 43)

Ignite SDC/HDC Robotic Camera Instruction Manual 43
Menu Selections
Fluorescent mode
Suited to indoor shooting under fluorescent lighting. Settings can be
changed using a simple menu.
Outdoor mode
Suited to outdoor shooting. Settings can be changed using a simple menu.
User mode
Settings can be changed using a detail menu.
Setting by Camera
1. Turn the camera on while keeping the MENU switch ( Figure 16 )
depressed.
2. The use mode setting menu ( Figure 17 ) appears on the monitor screen
and one of the use mode blinks .
Figure 17. Use Mode Setting Menu
3. Press the MENU switch, ITEM/AWC switch, or NO/BAR switch to let
the desired use mode blink.
• MENU switch: The blinking item moves up one.
• ITEM/AWC switch, NO/BAR switch: The blinking item moves down
one.
4. Press the YES/ABC switch. The blinking use mode comes into effect.
After the use mode setting menu is shown for about 5 seconds, the
camera returns to ready and operates in the selected use mode.
8492_13_r0