Grass Valley SiteConfig v.2.1 - Manual (Page 83)

2. In the Tasks list view, view tasks and determine if you must set deployment options.
Tasks that need to have deployment options set display in the Details column a message stating
"Deployment options required."
If you select a task that needs to have its deployment options set, the Start Deployment button
is disabled and the message is displayed next to the button.
3. Do one of the following to set deployment options:
• Double-click the task.
• Select the task and click the Options button.
A wizard opens.
Options are displayed, similar to those in a standard software installation wizard when you install
software manually.
4. Work through the wizard to set options.
5. If you have multiple devices of the same type, you can enter deployment options for one of them
using the wizard. Then, when you bring up the same wizard on every device, you can choose
the
Use options from radio button and select the first device for which you set options.
SiteConfig copies the options you set for the first device and fills in the blanks on the wizard.
11 October 2011 SiteConfig 2.1 User Manual 83
Working with software deployment