Grass Valley SiteConfig v.2.1 - Manual (Page 57)

7. To modify planned settings, do the following:
a) Select the network settings and click Edit .
The Edit IP Address dialog box opens.
b) Edit IP address settings as follows:
Description Setting
Select the network for the interface Network
Select DHCP or Static, as appropriate for the network. Address Allocation
Select the IP address for the interface IP Address
The networks listed in the Edit IP Address dialog box are those currently defined in the system
description, with available settings restricted according to the network definition. If you
require settings that are not available, you can close dialog boxes and go to the
Network
Configuration | Networks tab to modify network settings, then return to the Edit IP Address
dialog box to continue.
8. When you have verified that the planned settings are correct, click OK , then Yes to apply settings
to the device and close.
11 October 2011 SiteConfig 2.1 User Manual 57
Working with network configuration