Configuring deployment groups – Grass Valley SiteConfig v.2.1 User Manual
Page 76
Related Links
Working with network configuration
on page 21
on page 76
Checking all currently installed software on devices
on page 78
Adding a software package to a deployment group
on page 79
on page 82
Installing software
About software deployment tasks
on page 73
Working with devices and software deployment groups
Configuring deployment groups
Prerequisites for this procedure are as follows:
•
The device is assigned in the SiteConfig system description and network connectivity is present.
1. In the
Software Deployment | Deployment Groups
tree view, right-click the top node and select
Add Deployment Group
.
A deployment group appears in the tree view.
2. Right-click the deployment group, select
Rename
, and enter a name for the deployment group.
3. Right-click the deployment group and select
Add Target Device
.
The Add Target Device(s) wizard opens.
4. In the Available Target Devices tree view, select the node that displays the devices that you are
combining as a deployment group.
76
SiteConfig 2.1 User Manual
11 October 2011
Working with software deployment