Grass Valley 3404 CopperHead - Manual (Page 78)

72
Operation of CopperHead 3404 Transceiver System
The CopperHead 3404 Camera Unit Digital Display
The BASE Rx/DIM accesses the Camera Unit dimming function. In order to change the
brightness of the Camera Unit LEDs push and hold the BASE Rx/DIM selector. This may take
a few moments. The dimming is cyclical - it will first change in direction and when it reaches
the limit of that direction it will begin to go in the opposite direction (bright to dim, dim to
bright).
REV Indicates that mode is REV
UBUS Indicates the UBUS microcontroller board is revision is being queried
REVH Indicates that the REV for the UBUS board is REVH
Display Description
The four-character Digital Display will indicate maximum brightness with
this readout, designating "eyes open”.
<- -> The four-character Digital Display will indicate minimum brightness with
this readout, designating "eyes closed”.
Readout Camera Unit Digital Display Activity Explanation