Grass Valley 3404 CopperHead - Manual (Page 26)

20
Feature Detailed Description
CopperHead 3404 Camera Unit Front Side
The CopperHead 3404 Camera Unit is shipped with a variety of Battery Mount to camera
types. The Sony V-mount and the Anton Bauer mount are the most common. PAG and
other battery mount systems are available by special order. Please contact Grass Valley, a
Belden Brand or your authorized dealer.
Area C - Signal/Data Indicators
Fig. 4-4: Signal/Data Indicators
The CopperHead 3404 Camera Unit Indicator Panel has a series of LED displays that monitor
the various signal paths between the Camera Unit and the Base Station.
For signals that remain constant, such as time code and video, the LED remains on as a
steady Green. For signals that fluctuate, such as audio, the LED will reflect the varying signal
activity. If the LED is off, either the signal has been lost or it is not in use.
The LED indicators on the left side of the panel indicate signal paths from the Base Station
to the Camera Unit. Right side LEDs indicate signal paths from the Camera Unit to the Base
Station.
• 1: HD/SD SDI Digital Video Signals - Monitors camera SDI Video to Base Station and
SDI return video to the Camera Unit (these are not the 4K-3G signals).
• 2: VBS 1-3 - Analog Video Signals 1-3 - VBS 1 is used for Camera Monitor video from
the Camera Unit to the Base Station and Return Video to the Base Station from the
Camera Unit:
• VBS 2 is used for Genlock (one way from Base Station to Camera)
Note: The 4K-3G Signal Indicators are located on the reverse side of the
Camera Unit adjacent to the 4K-3G SDI Connectors.