Unpacking the copperhead 3404 transceiver system – Grass Valley 3404 CopperHead User Manual
Page 10
4
About CopperHead 3404
Unpacking the CopperHead 3404 Transceiver System
Unpacking the CopperHead 3404 Transceiver System
The following table lists the various items shipped with a system depending on the
particular configuration.
Individual items shipped with a CopperHead 3404 system depend on the particular
configuration.
Please consult your packing slip and purchase order to ensure that you have received all of
the expected components. Inspect all components for scratches and other mechanical
damage, and inspect the electrical connectors for bent or damaged pins and latches.
Report any missing or damaged components to Grass Valley. See
You must use your own video and audio cables to make connections for Video, Tally, Black
Burst/Genlock, Base Station monitor, intercom, and other ancillary signals and equipment.
Suggestions for these cables are discussed later in this User Guide.
Leave the protective caps on the optical connectors whenever the fiber is disconnected.
CopperHead System Type
Description
Part Code
Tactical Fiber (local
power at camera)
Hybrid Fiber -
Standard Power
(Power Wafer)
Hybrid Fiber -
High Power
(PowerPlus)
CopperHead Camera Unit
CHG3-CAM
CopperHead Base Station
CHG3-BS
AC-to-DC Power Supply
ADAP-AC
No
No
Panel-Mountable Fiber
Extension
CH3BFC
No
Camera Remote cable
CHCR
Camera Signal cable
CH3CS
Base Station Remote cable
CHBR
Power Wafer w/jumper cable CHG3-PW
No
No
Eternal Power Wafer Supply
CH3-MPS
No
No
PowerPlus
PWRPLS
No
No
HDX Power Supply
HDX
No
No
Fiber jumper(s)
various
No
No
Reel or coil of Tactical Fiber
CA
No
No
Reel or coil of Hybrid Fiber
CA
No
Operations Manual
CA
Standard
Optional