Connections to the copperhead 3404 base station – Grass Valley 3404 CopperHead User Manual
Page 55
49
CopperHead 3404
User Guide
Connections to the CopperHead 3404 Base Station
Fig. 5-10: CopperHead 3404 Base Unit Connections
Multi-Pin Cable Assemblies Used with the CopperHead 3404 Base Station
• A: Camera Remote Control (Remote) Connector
Connect either your camera manufacturers Camera Remote Control or the Grass Valley
Universal Controller - CHRCP-2050A or CHRCP-2050-LCD.
See
on page 88 for a list of Grass Valley supplied cables.
• B: Data/GPI Connector
Connect a Remote Pan/Tilt/Zoom Control Unit and connect to one GPI Out and two GPI
inputs. Usage of GPI/Os other than Tally and Intercom control is outside of the scope of
this User Guide.
Serial Control devices using RS232/422/485 can be controlled over this signal path.
See
on page 94 for wiring details.
• C: Audio In Connector
Connect Intercom Program Audio and four Production Audio Channel outputs
See
on page 94 for wiring details.
• D: Audio Out Connector
Carries audio back from the camera location - connect to an audio processing chain or
monitors. See
on page 94 for wiring details.