Grass Valley 3404 CopperHead - Manual (Page 60)

54
Installing and Connecting the System
Connectors into and out of the CopperHead 3404 Camera Unit Back Side
• 13: VBS Out
BNC Connector - Carries SD Analog video from the Base Station the Camera Unit.
Typically this will feed an analog viewing monitor at the camera location.
• 14: Ethernet Out
RJ45 Connector - Carries IP Data. Typically connects to a Laptop computer or perhaps a
wireless access point at the camera location. Any IP traffic controlled equipment can be
handled through this signal path.
• 15: Power Wafer Connector
Multi-Pin Connector C - Supplies power to the Camera Unit from the Power Wafer (if so
configured). This cable is supplied with the Power Wafer Power Adaptor.
• 16: Fiber Connector
Swivel Mounted Fiber Optic Cable receptacle - specific connector depends on your
configuration.
• 17: Intercom Headset Connector
Mini-phone Jack - Provides listen only Intercom audio.