Grass Valley Aurora Edit LD v.7.0 - Manual (Page 49)

1. Click the View Thumbnails button in the Bin Toolbar, if you need to change to
thumbnail mode.
2. Click to select a Bin; the contents display in the window below.
If you are in the highest-level bin, you will not see all of the column choices.
3. Click the Column Manager button in the Bin Toolbar.
4. Select the columns you want to display or click the Reset button to display all of
the columns.
• Name — Displays the name of the clip or sequence.
• Description — Displays the description of the clip or sequence.
• Keywords — Displays any keywords entered; keywords help to identify and
search for specific clips.
• Created — Displays the date the clip or sequence was created.
• Folder — Displays the directory where the clip files are stored.
• Duration — Displays the length of the clip or sequence.
• Mark In — Displays the Mark In timecode.
• Mark Out — Displays the Mark Out timecode.
• Video Format — Displays the video format used for the media.
• Video Aspect — Displays the video aspect for the media, 4:3 or 16:9.
• Video Resolution — Displays the video resolution for the media.
• Compression — Displays the video compression type for the clip or sequence;
e.g., DV25, DV50, MPEG2, IMX30, IMX40, IMX50.
• Chroma Format — Displays the chroma ratio for the media, 4:1:1, 4:2:0 or
4:2:2.
• Tracks — Displays the tracks present in the clip.
• Tape ID — Displays the name of the source VTR tape where the media in this
clip came from.
• Modified — Displays the date of the last time the clip was modified.
• Status — Displays the clip status: All, Good, Bad, or Marked.
• Audio Format — Displays the audio bit depth: 16-bit PCM or 24-bit PCM.
A checkmark appears next to the selected options.
5. Click OK .
The Bin displays your new column choices.
08 April 2010 Aurora Edit LD User Guide 49
Working in the Bin