Grass Valley Aurora Edit LD v.7.0 - Manual (Page 188)

• The Initial Duration field is provided for when a graphic is saved to the Timeline
and no mark in or mark out has been set for the graphic, it will default to the duration
set here.
• The Play Out duration is the command from VizRT telling when a graphic is on-air
and it has an animation to come off the screen this is the typical duration. Every
animation will have a play in and a play out. The play in is known (by the Inititial
duration) and the play out is determined by the Graphics department.
Refer to the Aurora Edit and Aurora Edit LD Installation Manual and the Aurora Edit
and Aurora Edit LD Release Notes for more detailed instructions for installing and
configuring this option.
Configuring the VizRT NLE Configuration Tool
The first time you do a retrieval of a VizRT graphic from the VizRT system, a NLE
Configuration Tool will need to be configured by the user.
If the VizRT Configuration Tool comes up the first time you try to retrieve a VizRT
graphic, you will need to fill in the required fields and set the pulldowns to match your
application. Check your VizRT documentation for more informatiion on these settings.
The settings given here are only examples and may differ for your application.
1. When the VizRT NLE Configuration Tool comes up, on the Advanced Settings
page, select All Settings as the Settings view to see the example Setting page below.
2. In the Plugin user interface pulldown, select Newsroom Component .
3. In the Viz Engine network compression pulldown, select RLE Compression .
4. Check the box in the Viz Engine prefetching field.
188 Aurora Edit LD User Guide 08 April 2010
Graphic Tools