Grass Valley Aurora Edit LD v.7.0 - Manual (Page 131)

Setting the pan control adjusts the sound location for your sequence. You can select
where the audio tracks of your sequence output by specifying the number of output
channels and routing those channels.
1. In the Audio Mixer Tool, click the Settings button to bring up the Timeline
Audio Settings controls.
2. Select Monitor Mix or Output Mix from the pulldown.
Monitor Mix controls the panning and channel output for the speakers in the edit
bay, and does not affect sends to the server, play to tape, or live playout through
the Playback Channel.
Output Mix controls the panning and channel output for the actual output of your
sequence for playout.
3. Set the pan control by dragging the pan slider for an audio channel to the right or
left position; press Alt + click on a pan slider to set the pan direction to center.
By default, odd-numbered channels pan to the left and even-numbers channels
pan to the right. Changing the pan direction affects the entire track in a sequence.
4. Route audio channels by selecting the channels you want to output: 1+2 , 3+4 , etc.
or All.
For a two-channel system, audio channels route by default as follows:
Audio output routes to... If the pan control is in this position...
Channel 1 Left
Channel 2 Right
08 April 2010 Aurora Edit LD User Guide 131
Audio