H3C Technologies H3C SecPath F1000-E User Manual

Page 91

[DeviceA-GigabitEthernet1/1] quit

[DeviceA] interface gigabitethernet 2/1

[DeviceA-GigabitEthernet2/1] pim sm

[DeviceA-GigabitEthernet2/1] quit

[DeviceA] interface gigabitethernet 3/1

[DeviceA-GigabitEthernet 3/1] pim sm

[DeviceA-GigabitEthernet 3/1] quit

[DeviceA] interface loopback 0

[DeviceA-LoopBack0] pim sm

[DeviceA-LoopBack0] quit

The configuration on Device B, Device C and Device D is similar to the configuration on Device A. The

specific configuration steps are omitted here.
# Configure PIM domain borders on Device C.

[DeviceC] interface gigabitethernet 3/1

[DeviceC-GigabitEthernet 3/1] pim bsr-boundary

[DeviceC-GigabitEthernet 3/1] quit

[DeviceC] interface gigabitethernet 3/2

[DeviceC-GigabitEthernet 3/2] pim bsr-boundary

[DeviceC-GigabitEthernet 3/2] quit

[DeviceC] interface gigabitethernet 2/1

[DeviceC-GigabitEthernet2/1] pim bsr-boundary

[DeviceC-GigabitEthernet2/1] quit

The configuration on Device A, Device B and Device D is similar to the configuration on Device C. The

specific configuration steps are omitted here.

Step3

Configure C-BSRs and C-RPs

# Configure Loopback 0 on Device A as a C-BSR and a C-RP.

[DeviceA] pim

[DeviceA-pim] c-bsr loopback 0

[DeviceA-pim] c-rp loopback 0

[DeviceA-pim] quit

The configuration on Device C and Device D is similar to the configuration on Device A. The specific

configuration steps are omitted here.

Step4

Configure MSDP peers

# Configure an MSDP peer on Device A.

[DeviceA] msdp

[DeviceA-msdp] peer 192.168.1.2 connect-interface gigabitethernet 3/1

[DeviceA-msdp] quit

# Configure MSDP peers on Device C.

[DeviceC] msdp

[DeviceC-msdp] peer 192.168.1.1 connect-interface gigabitethernet 3/1

[DeviceC-msdp] peer 10.110.5.2 connect-interface gigabitethernet 2/1

This manual is related to the following products: