H3C Technologies H3C SecPath F1000-E - Manual (Page 201)

38
Assume that Host A needs to receive information addressed to IPv6 multicast group G (FF0E::101). Once
the IPv6 multicast source S (4001::100/64) sends IPv6 multicast packets to the IPv6 multicast group G, an
SPT is established through traffic flooding. Devices on the SPT path (Device A and Device D) have their
(S, G) entries. Host A sends an MLD report to Device A to join IPv6 multicast group G, and a (*, G) entry
is generated on Device A. To view the IPv6 PIM routing information on a device, use the display pim
ipv6 routing-table command. For example:
# View the IPv6 PIM multicast routing table information on Device A.
[DeviceA] display pim ipv6 routing-table
Total 1 (*, G) entry; 1 (S, G) entry
(*, FF0E::101)
Protocol: pim-dm, Flag: WC
UpTime: 00:01:24
Upstream interface: NULL
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/1
Protocol: mld, UpTime: 00:01:20, Expires: never
(4001::100, FF0E::101)
Protocol: pim-dm, Flag: ACT
UpTime: 00:01:20
Upstream interface: GigabitEthernet2/0
Upstream neighbor: 1002::2
RPF prime neighbor: 1002::2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/1
Protocol: pim-dm, UpTime: 00:01:20, Expires: never
The information on Device B and Device C is similar to that on Device A.
# View the IPv6 PIM multicast routing table information on Device D.
[DeviceD] display pim ipv6 routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(4001::100, FF0E::101)
Protocol: pim-dm, Flag: LOC ACT
UpTime: 00:02:19
Upstream interface: GigabitEthernet1/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 3
1: GigabitEthernet2/0
Protocol: pim-dm, UpTime: 00:02:19, Expires: never
2: GigabitEthernet3/0
Protocol: pim-dm, UpTime: 00:02:19, Expires: never
3: GigabitEthernet3/1