H3C Technologies H3C SecPath F1000-E User Manual

Page 143

[DeviceB-GigabitEthernet3/2] multicast boundary 239.0.0.0 8

[DeviceB-GigabitEthernet3/2] quit

# On Device C, configure GigabitEthernet 3/1 and GigabitEthernet 3/2 as the boundary of
admin-scope zone 2.

system-view

[DeviceC] interface gigabitethernet 3/1

[DeviceC-GigabitEthernet3/1] multicast boundary 239.0.0.0 8

[DeviceC-GigabitEthernet3/1] quit

[DeviceC] interface gigabitethernet 3/2

[DeviceC-GigabitEthernet3/2] multicast boundary 239.0.0.0 8

[DeviceC-GigabitEthernet3/2] quit

# On Device D, configure GigabitEthernet 3/1 as the boundary of admin-scope zone 2.

system-view

[DeviceD] interface gigabitethernet 3/1

[DeviceD-GigabitEthernet3/1] multicast boundary 239.0.0.0 8

[DeviceD-GigabitEthernet3/1] quit

Step4

Configure C-BSRs and C-RPs

# On Device B, configure the service scope of RP advertisements and configure GigabitEthernet 2/1 as

a C-BSR and C-RP of admin-scope zone 1.

[DeviceB] acl number 2001

[DeviceB-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255

[DeviceB-acl-basic-2001] quit

[DeviceB] pim

[DeviceB-pim] c-bsr group 239.0.0.0 8

[DeviceB-pim] c-bsr gigabitethernet 2/1

[DeviceB-pim] c-rp gigabitethernet 2/1 group-policy 2001

[DeviceB-pim] quit

# On Device D, configure the service scope of RP advertisements and configure GigabitEthernet 2/1 as
a C-BSR and C-RP of admin-scope zone 2.

[DeviceD] acl number 2001

[DeviceD-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255

[DeviceD-acl-basic-2001] quit

[DeviceD] pim

[DeviceD-pim] c-bsr group 239.0.0.0 8

[DeviceD-pim] c-bsr gigabitethernet 2/1

[DeviceD-pim] c-rp gigabitethernet 2/1 group-policy 2001

[DeviceD-pim] quit

# On Device F, configure GigabitEthernet 2/1 as a C-BSR and C-RP in the global scope zone.

system-view

[DeviceF] pim

[DeviceF-pim] c-bsr global

[DeviceF-pim] c-bsr gigabitethernet 2/1

[DeviceF-pim] c-rp gigabitethernet 2/1

[DeviceF-pim] quit

Step5

Verify the configuration

This manual is related to the following products: