H3C Technologies H3C SecPath F1000-E - Manual (Page 134)

38
generated on Device A. You can use the display pim routing-table command to view the PIM
routing table information on each device. For example:
# View the PIM routing table information on Device A.
[DeviceA] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
Protocol: pim-dm, Flag: WC
UpTime: 00:04:25
Upstream interface: NULL
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/1
Protocol: igmp, UpTime: 00:04:25, Expires: never
(10.110.5.100, 225.1.1.1)
Protocol: pim-dm, Flag: ACT
UpTime: 00:06:14
Upstream interface: GigabitEthernet2/0
Upstream neighbor: 192.168.1.2
RPF prime neighbor: 192.168.1.2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/1
Protocol: pim-dm, UpTime: 00:04:25, Expires: never
The information on Device B and Device C is similar to that on Device A.
# View the PIM routing table information on Device D.
[DeviceD] display pim routing-table
VPN-Instance: public net
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.5.100, 225.1.1.1)
Protocol: pim-dm, Flag: LOC ACT
UpTime: 00:03:27
Upstream interface: GigabitEthernet1/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 3
1: GigabitEthernet2/0
Protocol: pim-dm, UpTime: 00:03:27, Expires: never
2: GigabitEthernet3/0
Protocol: pim-dm, UpTime: 00:03:27, Expires: never
3: GigabitEthernet3/1