H3C Technologies H3C SecPath F1000-E - Manual (Page 212)

49
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:10
# View the BSR information and the locally configured C-RP information on Device F.
[DeviceF] display pim ipv6 bsr-info
Elected BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Elected
Scope: 14
Uptime: 00:01:11
Next BSR message scheduled at: 00:00:49
Candidate BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Elected
Scope: 14
Candidate RP: 8001::1(GigabitEthernet2/1)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:55
To view the RP information learned on a device, use the display pim ipv6 rp-info command. For
example:
# View the RP information on Device B.
[DeviceB] display pim ipv6 rp-info
PIM-SM BSR RP information:
prefix/prefix length: FF0E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF1E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF2E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51