H3C Technologies H3C SR6600-X - Manual (Page 66)

56
Replacing a MIM
1. Face the front of the router and locate the MIM to be removed.
2. Use a flat-blade screwdriver to completely loosen the captive screws of the MIM.
3. Holding the handle of the MIM, gently pull the MIM out of slot along the slide rails.
Figure 69 Pulling the MIM out of the slot
4. Install a new MIM. For the installation procedure, see " Installing a MIM ."
If you do not install a new MIM in the slot, install a filler panel.
Replacing a CF card
CAUTION:
To avoid hardware damage, do not remove the CF card when the router is booting or the CF LED is
flashing.
To replace a CF card:
1. Press the CF card eject button of the CF card reader so that the eject button projects from the panel.
2. Press the eject button again to eject the CF card part-way out of the CF card reader, and then pull
the CF card out of the CF card reader.
Figure 70 Removing a CF card
3. Install a new CF card. For the installation procedure, see " Installing a CF card ."