H3C Technologies H3C SR6600-X - Manual (Page 39)

29
3. Connect the end marked with "+"to the positive terminal (+) on the power module connector and
fasten the fastening screw.
Figure 30 Attaching the power cords to the power module connector
4. Insert the power module connector in right direction into the power module, and fasten the captive
screws with a Phillips screwdriver.
Figure 31 Installing the power module connector to the power module
5. Connect the other end of each power cord to the DC power source.
6. Use cable ties to secure the power cords to the rack post.