H3C Technologies H3C SR6600-X - Manual (Page 137)

127
Table 49 SAP-4EXP LED description
LED Status Description
(green)
RUN
Off
No power input is available or the SAP-4EXP has
failed.
Slow flashing (1 Hz) The SAP-4EXP is operating correctly.
Fast flashing (8 Hz)
Application program is being loaded or the
SAP-4EXP is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-4EXP when
application program is being loaded.
(yellow/green)
Status LEDs
of SFP+ 0 to
SFP+ 3
Off No link is present.
Steady green A 10 Gbps link is present.
Flashing green
Data is being received or transmitted at a rate of 10
Gbps.
Steady yellow The transceiver module failed to be detected.
SPE LEDs
For SPE LED description, see the corresponding datasheet.
HIM/MIM LEDs
For HIM/MIM LED description, see H3C SR6600/SR6600-X Routers Interface Module Guide.
Power module LEDs
Figure 118 PSR650-A AC power module LED