H3C Technologies H3C SR6600-X - Manual (Page 125)

115
SAP-48GBP
CAUTION:
Use transceiver modules provided by H3C only. The router might be incompatible with other transceiver
modules.
SAP-48GBP front panel
Figure 104 SAP-48GBP front panel
(1) SFP ports 0 to 47 (2) SAP module status LED (RUN)
(3) LEDs for SFP ports 0 to 47 (4) Ejector lever
(5) Captive screw
SAP-48GBP specifications
Item Remarks
Flash 4 MB
Memory type and size
• Default—Two 1-GB DDR2 SDRAMs
• Maximum—Two 2-GB DDR2 SDRAMs
NVRAM 128 KB
Fixed Ethernet ports (SFP)
48 fiber Ethernet ports
Supporting 100/1000 Mbps autosensing
Supporting the following types of transceiver modules:
• 100 Mbps SFP fiber transceiver modules
• 1000 Mbps SFP fiber transceiver modules
• 100/1000 Mbps SFP fiber transceiver modules
• SFP-T copper transceiver modules. A fixed Ethernet port supports
10/100/1000 Mbps auto-sensing if used together with this transceiver
module.
Hot swapping Supported
SAP-48GBP fixed Ethernet port specifications
The fixed Ethernet ports of the SAP-48GBP have the same specifications as the fiber ports of the FIP-110
combo interfaces. For more information, see Table 34 .
Transceiver modules for the SAP-48GBP and the SAP-24GBP fiber ports are the same. For more
information, see Table 38 .