Fip-310 combo interface specifications, Fip-310 10 gbps ethernet port specifications – H3C Technologies H3C SR6600-X User Manual
Page 120

110
Item Remarks
Hot swapping
Supported
NOTE:
•
For a combo interface, the default operating port is the copper port. You can use either the copper port
or the fiber port. To switch between the copper and fiber ports, use the combo enable { copper | fiber }
command in interface view. For more information about the combo enable { copper | fiber } command,
see
H3C SR6600/SR6600-X Routers Interface Command Reference.
•
Use transceiver modules for the fiber ports provided by H3C only. The router might be incompatible with
transceiver modules from other manufacturers. The system generates an alarm when a transceiver
module from another manufacturer is installed.
FIP-310 combo interface specifications
Specification of combo interfaces on the FIP-310 is the same as FIP-110. For more information, see
.
Transceiver modules for the FIP-310 are the same as the FIP-110. For more information, see
.
FIP-310 10 Gbps Ethernet port specifications
Table 36 FIP-310 10 Gbps Ethernet port specifications
Specification Description
Connector type
LC
Transceiver module type
SFP+
Interface standards
802.3ae
Transmission
power
Type
Short-haul
multi-mode
(850 nm)
Mid-haul
single-mode
(1310 nm)
Long haul
(1310 nm)
Long haul
(1550 nm)
Super long
haul (1550
nm)
Minimum
–7.3 dBm
–6.5 dBm
–8.2 dBm
–4.7 dBm
0 dBm
Maximum
–1 dBm
0.5 dBm
0.5 dBm
4 dBm
4 dBm
Receive sensitivity
–7.5 dBm
–6.5 dBm
–10.3 dBm
–11.3 dBm
–24 dBm
Central wavelength
850 nm
1310 nm
1310 nm
1550 nm
1550 nm
Fiber type
50/125 μm
and
65.5/125
μm
multi-mode
fiber
50/125 μm
and
65.5/125 μm
multi-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
Operating mode
10 Gbps (full duplex)
Transceiver modules available for the FIP-310 10 Gbps Ethernet port
Transceiver module
Central
wavelength Connector Fiber
specifications
Max transmission
distance
SFP-XG-SX-MM850-A 850
nm LC
50/125
μm, multi-mode
300 m (984.25 ft)
SFP-XG-LX-SM1310 1310
nm LC
9/125
μm, single mode
10 km (6.21 miles)