beautypg.com

Appendix c cables, Ethernet twisted pair cable, Introduction – H3C Technologies H3C SR6600 User Manual

Page 72

background image

64

Appendix C Cables

The H3C SR6602 supports various types of interface modules. The port types of the interface modules

vary by model.
For how to use cables to connect the ports of different interface modules, see the H3C SR6600 Routers

Interface Module Guide.

Table 27 Cables

Cable

Applicable port type

Description

Ethernet twisted pair cable

RJ-45 Ethernet port

Connects the RJ-45 Ethernet port of
the router for data transmission.

Optical fiber

SFP port

Connects the fiber port of the router
for data transmission.

E1 interface cable

E1 interface

Connects the E1 interface of the
router for data transmission.

T1 interface cable

T1 interface

Connects the T1 interface of the
router for data transmission.

CE3/CT3 interface cable

CE3/CT3 interface

Connects the CE3/CT3 interface of
the router for data transmission.

Serial port cable

Serial port

Connects the serial port of the
router for data transmission.

Ethernet twisted pair cable

Introduction

An Ethernet twisted pair cable consists of four pairs of insulated copper wires twisted together. Every

wire uses a different color, and has a diameter of about 1 mm (0.04 in). A pair of twisted copper cables

can cancel the electromagnetic radiation of each other, and reduce interference of external sources. An

Ethernet twisted pair cable mainly transmits analog signals and is advantageous in transmitting data

over shorter distances. It is the commonly used transmission media of the Ethernet. The maximum
transmission distance of the Ethernet twisted pair cable is 100 m (328.08 ft). To extend the transmission

distance, you can connect two twisted pair cable segments with a repeater. At most four repeaters can

be added, which means five segments can be joined together to provide a transmission distance of 500

m (1640.42 ft).
Ethernet twisted pair cables can be classified into category 3, category 4, category 5, category 5e,

category 6, and category 7 cables based on performance. In LANs, category 5, category 5e, and
category 6 are commonly used.

Table 28 Description of commonly used Ethernet twisted pair cables

Type Description

Category 5

Suitable for data transmission at a maximum speed of 100 Mbps