H3C Technologies H3C SR6600 - Manual (Page 67)

59
Item Specification
Transmission distance ≤15 m (49.21 ft)
Services
Provides connection to an ASCII terminal
Provides connection to the serial port of a local PC to run the terminal emulation
program
Command line port (CLI)
AUX port
The AUX port is an RS-232 asynchronous serial port used for remote configuration or dialup backup. You
must connect the local modem to the remote modem through public switched telephone network (PSTN)
and then to the remote device for remote system debugging, configuration, maintenance, and
management. In the event that the console port fails, the AUX port can be connected to a terminal as a
backup port of the console port. For how to connect a terminal through the AUX port, see the chapter
“ Connecting Ethernet cables .”
Table 22 Technical specifications for the AUX port
Item Specification
Connector RJ-45
Compliant
standard
RS-232
Baud rate
9600 bps to 115200 bps
9600 bps (default)
Services
Used to connect the serial port of a remote PC through a pair of modems to establish a
dial-up connection with the PC
Combo ports
Technical specifications for copper Ethernet ports
Table 23 Technical specifications for copper Ethernet ports
Item Specification
Connector RJ-45
Port Automatic MDI/MDI-X
Frame format
Ethernet_II
Ethernet_SNAP
10 Mbps auto-sensing Half/full-duplex auto-negotiation
100 Mbps auto-sensing Half/full-duplex auto-negotiation Rate and duplex mode
1000 Mbps auto-sensing Full-duplex