H3C Technologies H3C SR6600 - Manual (Page 40)

32
To do… Use the command…
Set the authentication mode authentication-mode none
Set the user privilege level user privilege level 3
Step2 Connect the AUX port to the configuration terminal by using the console cable. Then you can log in to
the router through the AUX port.
NOTE:
For more information about how to log in to the router, see the H3C SR6600 Routers Configuration
Guides.
Configuring basic settings
Follow these steps to configure basic settings for the router:
To do… Use the command… Remarks
Set the current time and date clock datetime time date
Optional
Available in user view
Enter system view system-view
Required
Available in user view
Enter Ethernet interface view
interface interface-type
interface-number
—
Specify an IP address for the
interface ip address ip-address { mask-length
| mask } [ sub ] By default, no IP address is
assigned to any interface.
Return to system view quit Available in any view
Specify a static route
ip route-static dest-address { mask |
mask-length } { next-hop-address |
interface-type interface-number
[ next-hop-address ] | vpn-instance
d-vpn-instance-name
next-hop-address } track
track-entry-number [ preference
preference-value ] [ tag tag-value ]
[ description description-text ]
Required
By default, the preference of a
static route is 60, tag is 0, and no
description is configured.
Do not specify the permanent
keyword together with the bfd or
track keyword.
Save the current configuration to
the root directory of the storage
media, and specify it as the boot
file to be used at the next boot
save [ safely ] [ backup | main ]
[ force ]
Available in any view
Display the running configuration display current-configuration Available in any view