H3C Technologies H3C SR6600 - Manual (Page 41)

33
Hardware management and maintenance
This chapter includes these sections:
• Displaying hardware information of the router
• Displaying the temperature alarm thresholds for an interface module
• Configuring a combo interface
• Displaying transceiver module information and alarming information
• Solving system faults
• Saving the running configuration of the router
• Rebooting the router
NOTE:
The CLI and outputs depend on your router model. For more information about the commands used in this
chapter, see the corresponding command references.
Displaying hardware information of the router
Displaying software and hardware version information of the
router
Use the display version command to display software and hardware version information of the router.
The output includes the following information: the current software version and hardware version, router
operating time, and the type and operating time of each interface module.
display version
H3C Comware Platform Software
Comware Software, Version 5.20, R0600
Copyright (c) 2010 Hangzhou H3C Technologies Co., Ltd.
H3C SR6602 uptime is 0 week, 0 day, 0 hour, 4 minutes
CPU type: RMI XLR732 1000MHz
1024M bytes DDR2 SDRAM Memory
4M bytes Flash Memory
PCB Version: Ver.B
Logic Version: 135.0
Basic BootWare Version: 1.16
Extend BootWare Version: 1.31
[FIXED PORT] CON (Hardware)Ver.B, (Driver)1.0, (Cpld)135.0
[FIXED PORT] AUX (Hardware)Ver.B, (Driver)1.0, (Cpld)135.0
[FIXED PORT] GE 0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)132.0
[FIXED PORT] GE 0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)132.0
[FIXED PORT] GE 0/2 (Hardware)Ver.A, (Driver)1.0, (Cpld)132.0
[FIXED PORT] GE 0/3 (Hardware)Ver.A, (Driver)1.0, (Cpld)132.0