Displaying operational statistics of the router – H3C Technologies H3C SR6600 User Manual
Page 42
34
[SLOT 1] MIM-4SAE (Hardware)2.0, (Driver)1.0, (Cpld)2.0
[SLOT 2] The SubCard is not present
Displaying operational statistics of the router
When you perform routine maintenance or the system fails, you may need to display the operational
information of each functional module for locating failures. Generally, you need to run the display
commands one by one. To collect more information one time, you can execute the display
diagnostic-information command in any view to display or save the operational statistics of multiple
functional modules of the router. This command displays the output of the display clock, display version,
display device, and display current-configuration commands.
•
Save the operational statistics of each functional module of the router.
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag
Diagnostic information is outputting to cfa0:/aa.diag.
Please wait...
Save succeeded.
Execute the more aa.diag command in user view, and then press the Page Up and Page Down keys to
view the contents of the file aa.diag.
•
Display the operational statistics of each functional module of the router. The output is too much and
omitted here.
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
08:54:16 UTC Fri 11/12/2010
===================================================
===============display version===============
===================================================
Omitted
Displaying detailed information about interface modules
Use the display device verbose command to display detailed information of interfaces modules in each
slot.
System-mode(Current/After Reboot): Normal/Normal
Slot No. Card Type Status Max Ports
--------------------------------------------------------
0 Fixed SubCard Normal 6
1 MIM-4SAE Normal 4
2 N/A Absent N/A
Use the display device slot slot-number command to display detailed information about the interface
modules in the specified slot.
System-mode(Current/After Reboot): Normal/Normal