beautypg.com

Verifying the installation, Figure 26 – H3C Technologies H3C SR6600 User Manual

Page 33

background image

25

Figure 26 Remove the protection cover

Step4

Insert the RPS plug in the RPS DC receptacle of the router.

Step5

Use a flat-blade screwdriver to fix the two fastening screws on the RPS plug to secure the plug to the RPS

DC receptacle of the router.

Step6

Connect the other end of the RPS power cord to the RPS power source.

Figure 27 Connect an RPS DC power cord to the router

(1) RPS power receptacle (RPS)

(2) RPS plug

(3) RPS input

(4) RPS plug

(5) RPS power supply

Step7

Power on the router and RPS.

Step8

Check the RPS status LED.

Verifying the installation

Before powering on the router, check the following items:

The power source matches that required by the router.

The grounding cable is securely connected.

The router is correctly to other devices such as configuration terminal.