H3C Technologies H3C SR6600 - Manual (Page 70)

62
Appendix B LEDs
Panel LEDs
Front panel LEDs
Table 25 Description of front panel LEDs
LED Status Meaning
Off
The power module is not supplying power to the
system.
PWR (green)
On
The power module is supplying power to the system
properly.
Off No RPS DC power input.
Solid green Both AC power input and RPS DC input are normal.
RPS (yellow/green)
Solid yellow
AC power input is abnormal, and RPS DC input is
normal.
Off
No interface module is in slot 1 or the interface
module is faulty.
SLOT1 (green)
On
An interface module is in slot 1 and operates
properly.
Off
No interface module is in slot 2 or the interface
module is faulty.
SLOT2 (green)
On
An interface module is in slot 2 and operates
properly.
Off The system is powered off or the board is faulty.
Slow blinking (1 Hz) The board operates properly as configured.
SYS (green)
Fast blinking (8 Hz)
Software is being loaded or the board does not start
working yet.
Off
No CF card is in position or the CF card cannot be
identified.
On
A CF card is in position and the host has detected
the CF card. You can remove the card in this state.
CF (green)
Blinking
The system is accessing the CF card. Do not remove
the card in this state.
Off No host is connected to the USB port.
On
A host is connected to the USB port. You can unplug
the USB cable in this state. USB1 (green)
Blinking
Data is being transmitted or received. Do not unplug
the USB cable in this state.