H3C Technologies H3C SR6600 - Manual (Page 44)

36
Field Description
VENDOR_NAME Vendor name
The operation is not supported on
the specified board or subslot
The display device manuinfo command is not supported.
Displaying the CPU usage of the router
Use the display cpu-usage command to display the CPU usage of a router.
display cpu-usage
Unit CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table 9 Output description
Field Description
Unit CPU usage CPU usage
1% in last 5 seconds
Average CPU usage in the last five seconds (after the router boots, the router
calculates and records the average CPU usage at the interval of five
seconds).
1% in last 1 minute
Average CPU usage in the last minute (after the router boots, the router
calculates and records the average CPU usage at the interval of one
minute).
1% in last 5 minutes
Average CPU usage in the last five minutes (after the router boots, the router
calculates and records the average CPU usage at the interval of five
minutes).
Displaying the memory usage of the router
Use the display memory command to display the memory usage of a router.
display memory
System Total Memory(bytes): 78303680
Total Used Memory(bytes): 400350220
Used Rate: 16%
Table 10 Output description
Field Description
System Total Memory(bytes) Physical memory size (in bytes) of the router
Total Used Memory(bytes) Used memory size (in bytes) of the router
Used Rate Memory usage of the router
Displaying the CF card information
Use the display device cf-card command to display the CF card information.