H3C Technologies H3C SR6600 - Manual (Page 52)

44
Step3 If you do not install a new interface module in the slot, install two blank panels. To install a HIM, see
“ Installing the router .”
Replacing an MIM
Follow these steps to replace a MIM:
Step1 Use a flat-blade screwdriver to loosen the captive screws of the MIM to be removed.
Step2 Gently pull the MIM out of the slot along the slide rails.
Figure 35 Pull the MIM out of the slot
Step3 If you do not install a new interface module in the slot, install a blank panel. To install a MIM, see
“ Installing the router .”
Replacing a CF card
Follow these steps to replace a CF card:
Step1 Make sure that the CF card LED is not blinking.
Step2 Press the CF card eject button so that the eject button protects from the panel.
Figure 36 Press the eject button
Step3 Press the eject button again to eject the CF card part way out of the slot, and then pull the CF card out
of the slot.