Enabling rpr mate port smart connection, Changing the rpr physical port type – H3C Technologies H3C SR8800 User Manual
Page 38
29
Binding RPR physical ports with an RPR logical interface in RPR logical interface view
To bind RPR physical ports with an RPR logical interface in RPR logical interface view:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter RPR logical interface
view.
interface rpr interface-number N/A
3.
Bind a physical port with the
RPR logical interface.
rpr bind { { rprpos | rprxge }
interface-number } { ringlet0 |
ringlet1 }
By default, no RPR physical ports
are bound with an RPR logical
interface.
Binding RPR physical ports with an RPR logical interface in RPR physical port view
To bind RPR physical ports with an RPR logical interface in RPR physical port view:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter RPR physical port view.
interface { rprpos | rprxge }
interface-number
N/A
3.
Bind the RPR logical interface
with the physical port.
rpr bind { rpr interface-number }
{ ringlet0 | ringlet1 }
By default, no RPR physical ports
are bound with an RPR logical
interface.
Enabling RPR mate port smart connection
For an RPR station to forward traffic, before binding its two RPR physical ports with the same logical RPR
interface, you must connect their mate ports.
When the two RPR physical ports are on the same subcard (centralized RPR), you can enable the RPR
mate port smart connection function. With the function enabled, RPR automatically connects the two
mate ports without you having to connect them manually.
To enable RPR mate port smart connection:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter RPR logical interface
view.
interface rpr interface-number
N/A
3.
Enable RPR mate port smart
connection.
rpr mate smart-connect
Disabled by default.
Changing the RPR physical port type
To change the RPR physical port type on an RPR logical interface:
Step Command
1.
Enter system view.
system-view