H3C Technologies H3C SR8800 - Manual (Page 36)

27
Task Remarks
Configuring RPR timers
Configuring the ATD timer Optional
Configuring the hold off timer Optional
Configuring the keepalive timer Optional
Configuring the topology stability
timer
Optional
Configuring the TC timers Optional
Configuring the TP timers Optional
Configuring the WTR timer Optional
Testing connectivity between RPR stations Optional
Configuring basic RPR functions
Configuring an RPR physical port
NOTE:
RPR physical ports include RPR XGE interfaces and RPR POS interfaces.
To configure an RPR XGE interface:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter RPR XGE interface
view.
interface rprxge interface-number N/A
3. Configure the description for
the interface.
description text
Optional.
By default, the description of an
interface is interface-name
Interface.
4. Shut down the interface. shutdown
Optional.
Enabled by default.
5. Restore the default settings
of the interface.
default Optional.
To configure an RPR POS interface:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter RPR POS interface
view.
interface rprpos interface-number N/A