H3C Technologies H3C S5560 Series Switches - Manual (Page 24)

9
IP address MAC address VLAN Interface Aging Type
192.168.1.1 00e0-fc01-0000 10 GE1/0/1 N/A S
Multiport ARP entry configuration example
Network requirements
As shown in Figure 4 , a switch connects to three servers through interfaces GigabitEthernet 1/0/1,
GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 in VLAN 10. The servers share the IP address
192.168.1.1/24 and MAC address 00e0-fc01-0000.
Configure a multiport ARP entry so that the switch sends IP packets with the destination IP address
192.168.1.1 to the three servers.
Figure 4 Network diagram
Configuration procedure
# Create VLAN 10.
system-view
[Switch] vlan 10
[Switch-vlan10] quit
# Add GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 to VLAN 10.
[Switch] interface GigabitEthernet 1/0/1
[Switch-GigabitEthernet1/0/1] port access vlan 10
[Switch-GigabitEthernet1/0/1] quit
[Switch] interface GigabitEthernet 1/0/2
[Switch-GigabitEthernet1/0/2] port access vlan 10
[Switch-GigabitEthernet1/0/2] quit
[Switch] interface GigabitEthernet 1/0/3
[Switch-GigabitEthernet1/0/3] port access vlan 10
[Switch-GigabitEthernet1/0/3] quit
# Create VLAN-interface 10 and specify its IP address.
[Switch] interface vlan-interface 10
[Switch-vlan-interface10] ip address 192.168.1.2 24
[Switch-vlan-interface10] quit
Swtich
GE1/0/1 GE1/0/3
GE1/0/2
Server group
192.168.1.1/24
00e0-fc01-0000
Server Server Server