Configuring ipv6 prefix acquisition, Configuring stateless dhcpv6 – H3C Technologies H3C S5560 Series Switches User Manual
Page 205
190
Step Command
Remarks
4.
Enter interface view.
•
Layer 3 Ethernet interface:
interface interface-type
interface-number
•
Layer 3 aggregate interface:
interface route-aggregation
interface-number
•
Management Ethernet
interface:
interface M-GigabitEthernet
interface-number
•
VLAN interface:
interface vlan-interface
interface-number
N/A
5.
Configure the interface to use
DHCPv6 to obtain an IPv6
address and other
configuration parameters.
ipv6 address dhcp-alloc
[ rapid-commit ]
By default, the interface does not
use DHCPv6 for IPv6 address
acquisition.
Configuring IPv6 prefix acquisition
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
•
Layer 3 Ethernet interface:
interface interface-type
interface-number
•
Layer 3 aggregate interface:
interface route-aggregation
interface-number
•
Management Ethernet
interface:
interface M-GigabitEthernet
interface-number
•
VLAN interface:
interface vlan-interface
interface-number
N/A
3.
Configure the interface to use
DHCPv6 to obtain an IPv6
prefix and other configuration
parameters.
ipv6 dhcp client pd prefix-number
[ rapid-commit ]
By default, the interface does not
use DHCPv6 for IPv6 prefix
acquisition.
Configuring stateless DHCPv6
Step Command
Remarks
1.
Enter system view.
system-view
N/A