H3C Technologies H3C S5560 Series Switches - Manual (Page 114)

99
Figure 40 Network diagram
Configuration procedure
Before performing the following configuration, make sure that:
• The device and the host can reach each other.
• The IPv6 addresses of the interfaces are configured as shown in Figure 40 .
1. Configure the DNS server:
The configuration might vary by DNS server. The following configuration is performed on a PC
running Windows Server 2003. Make sure that the DNS server supports the IPv6 DNS function so
that the server can process IPv6 DNS packets and the interfaces of the DNS server can forward
IPv6 packets.
a. Select Start > Programs > Administrative Tools > DNS.
The DNS server configuration page appears, as shown in
Figure 41 .
b. Right-click Forward Lookup Zones, select New Zone, and then follow the wizard to create a
new zone named com.
Figure 41 Creating a zone
c. On the DNS server configuration page, right-click zone com, and select Other New Records.