H3C Technologies H3C S5560 Series Switches - Manual (Page 147)

132
Step Command Remarks
2. Specify the source address
for outgoing ICMP
packets.
ip icmp source [ vpn-instance
vpn-instance-name ] ip-address
By default, the device uses the IP address
of the sending interface as the source IP
address for outgoing ICMP packets.
Displaying and maintaining IP performance
optimization
Execute display commands in any view and reset commands in user view.
Task Command
Display brief information about RawIP connections. display rawip [ slot slot-number ]
Display detailed information about RawIP
connections. display rawip verbose [ slot slot-number [ pcb
pcb-index ] ]
Display brief information about TCP connections. display tcp [ slot slot-number ]
Display detailed information about TCP connections.
display tcp verbose [ slot slot-number [ pcb
pcb-index ] ]
Display brief information about UDP connections. display udp [ slot slot-number ]
Display detailed information about UDP connections.
display udp verbose [ slot slot-number [ pcb
pcb-index ] ]
Display IP packet statistics. display ip statistics [ slot slot-number ]
Display TCP traffic statistics. display tcp statistics [ slot slot-number ]
Display UDP traffic statistics. display udp statistics [ slot slot-number ]
Display ICMP statistics. display icmp statistics [ slot slot-number ]
Clear IP packet statistics. reset ip statistics [ slot slot-number ]
Clear TCP traffic statistics. reset tcp statistics
Clear UDP traffic statistics. reset udp statistics