beautypg.com

H3C Technologies H3C S5800 Series Switches User Manual

Page 85

background image

75

2.

Select the serial port to be used from the Connect using drop-down list, and click OK.

Figure 86 Set the serial port used by the HyperTerminal connection

3.

Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None,
and click OK.

Figure 87 Set the serial port parameters

4.

Select File > Properties in the HyperTerminal window.

See also other documents in the category H3C Technologies Routers: