H3C Technologies H3C S5800 Series Switches - Manual (Page 66)

56
Connecting the power cord
Table 33 Power cord connection procedures for the S5800 switches
Power module Connection procedure reference
Fixed power module
AC input Connecting an AC power cord to the switch
–54 VDC input (RPS powered) Connecting the switch to a –54 VDC output RPS
12 VDC input (RPS powered) Connecting the switch to a 12 VDC output RPS
Hot swappable power modules
PSR150-A
PSR150-A1
Connecting the PSR150-A/PSR150-A1
PSR150-D
PSR150-D1
–48 VDC input:
Connecting the PSR150-D/PSR150-D1 to a –48 VDC power source
–54 VDC input (RPS powered):
Connecting the PSR150-D/PSR150-D1 to a –54 VDC output RPS
PSR300-12A
PSR300-12A1
PSR300-12A2
Connecting the PSR300-12A/PSR300-12A1/PSR300-12A2
PSR300-12D1
PSR300-12D2
–48 VDC input:
Connecting the PSR300-12D1/PSR300-12D2 to a –48 VDC power
source
–54 VDC input (RPS powered):
Connecting the PSR300-12D1/PSR300-12D2 to a –54 VDC output RPS
PSR750-A Connecting the PSR750-A
PSR750-D
–54 VDC input (RPS powered):
Connecting the PSR750-D to a –54 VDC output RPS
LSVM1AC650
LSVM1AC300
Connecting the LSVM1AC650/LSVM1AC300
LSVM1DC650
LSVM1DC300 –48 VDC input:
Connecting the LSVM1DC650/LSVM1DC300
Connecting an AC power cord to the switch
To connect an AC power cord to a switch that uses fixed power modules:
1. Install the bail latch, fix the bail latch into the holes located at the two sides of the AC-input power
receptacle, and pull the bail latch upwards (see
Figure 56 or Figure 58 ).
2. Connect one end of the AC power cord to the AC-input power receptacle on the switch (see callout
1 in
Figure 57 or Figure 59 ).